Want to learn what the editors of Model Railroader and Model Railroader Video Plus use when they head down to the workshop to build the latest model or layout? Check out these Tried and True Tools and other products available at the Kalmbach Hobby Store! […]
Want to learn what the editors of Model Railroader and Model Railroader Video Plus use when they head down to the workshop to build the latest model or layout? Check out these Tried and True Tools and other products available at the Kalmbach Hobby Store! […]
Several packing houses were located in close proximity to each other along the Santa Fe in Placentia, Calif. Styles varied from the frame building at left to the concrete structure at center. Note the semaphore signal installations at right. Photo by Tom Baxter […]
THE CRIPPLE CREEK ENGINE WORKS Price: $89.99 Stock no.: 279-5926 Features: Assembled and decorated locomotive shop. One run-through stall and one dead-end stall. Exterior LED illumination. Illumination requires the Menards Plug & Play 4.5V power supply nos. 279-4061, 4062, or 4050, sold separately. Order online at Menards.com/Trains. Locomotives – steam or diesel – require regular […]
David’s pile of parts is much smaller, as he works to complete the O scale laser-cut wood turntable kit. In this episode, he’ll share his insights for working with basswood stock and bending metal rods. Next and final steps? Adding the finishing details! […]
The bridge assembly is well underway, so David can now focus on building and installing the wheels that put his O scale laser-cut wood turntable kit into motion. If that’s not enough, he even gets the rails placed on bridge deck and takes a locomotive for a spin! […]
The bridge assembly is well underway, so David can now focus on building and installing the wheels that put his O scale laser-cut wood turntable kit into motion. If that’s not enough, he even gets the rails placed on bridge deck and takes a locomotive for a spin! […]
After installing the motor mechanism, David adds an automated polarity control to his O scale laser-cut wood turntable kit. And then, it’s on to separating, sorting, and building the bridge assembly. […]
After installing the motor mechanism, David adds an automated polarity control to his O scale laser-cut wood turntable kit. And then, it’s on to separating, sorting, and building the bridge assembly. […]
David has now arrived at the stage where it’s time to install the drive mechanism into his assembled O scale laser-cut wood turntable kit. Follow along as he shares his process for fitting the 3-volt can motor and reduction gear used to put the structure into motion. […]
David has now arrived at the stage where it’s time to install the drive mechanism into his assembled O scale laser-cut wood turntable kit. Follow along as he shares his process for fitting the 3-volt can motor and reduction gear used to put the structure into motion. […]
Host Steve “Regular Guy” Brown shares views of his completed scratchbuilt cement loading terminal. Plus, you’ll also get to see an assortment of details he’s added to his Port Smith North setting on his N scale layout. All of that, and even more! […]
